Technical Details:
The kit includes an Ht213 spinning rod holder and an FFr222 mounting system. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an M6 DIN 934 nut with a hex knob) and ...
Technical Details:
It has been designed for installation of the Garmin Panoptix LiveScope transducer and transducers with side mounting. The design consists of an eccentric tube Ø 20,4 mm (L — 400 mm), connected to a similar tube (L — 170 mm) by a two-element clamp and to a tube (L — 120 mm) with 7.5° spline tilt joint. The design is fixed into the mount by a male adapter sh...
Technical details:
It is intended for organizing the things on the vessel. The design consists of a board (282 x 380 mm), an Fs219 mount attached under the surface with four 6.3*16 DIN 9200 self-tapping screws, a swivel-tilt male to male adapter with a 27.7° spline joint including a knob with an inserted M6 DIN 934 nut, a spring and an M6*55 DIN 933 bolt. Eight neodymium mag...
Technical Details:
Designed for supporting electric motor arms, the diameter of which is up to 50 mm. The assembly includes an Rh101 holder, an SBa038 adapter and an Fs223 T-Track adapter. The design of the holder consists of a body with an elastic clamp and external protrusions for its fixing, connected to the swivel-tilt adapter with an M6*40 DIN 912 screw and an M6 nut DI...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMa mounting system for mounting of spinning rod on the T-Track of kayaks. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 93...
Technical Details:
The kit has been designed for installation of a fish finder monitor and a transducer on PVC boats. The assembly includes the Ss223 plate for fish finder and telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate (164 х 68 mm) has a male adapter shaped as a 12 pointed star and is connected ...
Size S - Kit for Mounting of Fish Finder up to 7″ and Transducer on a Belly Boat CyllinderSize M - Kit for Mounting of Fish Finder 7″ — 9″ and Transducer on a Belly Boat CyllinderTechnical Details:
The kit has been designed for installation of a fish finder and a transducer on the belly boat (float tube) cylinder. It comprises the Ss223 plate, the FTr300 transducer arm mount...
Technical Details:
Designed for mounting action cameras at a distance of up to 710 mm from the installation place. The design comprises a 1/4'' screw thread and a 2-to-3 GoPro connector, attached to a two-stage telescopic tube (length adjustment from 420 to 710 mm) with a spline joint. The tube is connected to the male adapter shaped as a 12 pointed star using a 27.7° spline...
Technical Details:
Designed for supplementing action cameras monopods with 2 additional support points. The design includes two telescopic struts that are attached to the monopod using 2 two-element collars. The structure of each consists of 2 telescopic tubes (Ø 20.4 mm, L — 250 mm), a male adapter shaped as a 12 pointed star, a ball joint, the tilt 15° spline joint, an exp...
Technical Details:
The set has been designed for installation of a fish finder monitor or a transducer on the PVC boats. The assembly includes the Sl223 plate for fish finder and a telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate 106 х 98 mm has a male adapter shaped as a 12 pointed star and is connec...
Technical Details:
It has been designed for installation of the fish finder on the different vessels. The assembly includes the Sl223 plate and the transducer mount. The plate (106 х 98 mm, the wall thickness is 3 mm) is equipped with a male adapter shaped as a 12 pointed star which rotates 360°. The plate is connected to the tube (Ø 20,4 mm, L — 170 mm) which is attached to...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMr132 mounting system for installation on tubes Ø 30/32 mm. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an...
Technical Details:
The system is designed to mount accessories provided with a male adapter shaped as a 12 pointed star on tubes Ø 20 — 32 mm and surfaces from 10 to 32 mm thick without drilling. Consists of two Fs219 mounts and a bench mounting pad. The design of the bench includes a bracket, the inner upper part of which is covered with PVC, a clamp with an M3.2 DIN 6799 l...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMp224 mounting system for inflatable PVC cylinders. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, a tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an M6 DIN 93...
Technical Details:
The assembly is designed for installation of the transducer at a distance of 300 mm from the mounting point on the ELLING OPTIMUS belly boats (float tube) boltrope. It includes the transducer arm mount and an Mx mounting system. The design consists of a transducer fastening with an M6*50 DIN 931 bolt and a square knob nut that is connected to the Ø 22 mm (...
Technical Details:
Designed to mount accessories with a male adapter shaped as a 12 pointed star on T-Tracks of motorboats and kayaks. The system consists of two Fs219 mounts and a mounting pad which moves along the track and is fixed in the selected place using 2 universal T-bolts (45 х 25 х 12 mm) and M6 DIN 934 nuts with plastic knobs. Each of the mounts is attached to th...
Technical Details:
The system is designed to mount accessories provided with a male adapter shaped as a 12 pointed star on tubes of Ø 20 — 32 mm and surfaces from 10 to 32 mm thick without drilling. Consists of an Fs219 mount and a bench mounting pad. The design of the bench pad includes a bracket, the inner upper part of which is covered with PVC, a clamp with an M3.2 DIN 6...
Technical Details:
The assembly includes a Ht213 spinning rod holder and an Mx mounting system, designed for installation on the boltrope of PVC inflatables (motorboats and belly boats). The design of the holder comprises a retainer, an end limiter and a hole for a safety carabiner. The holder and a the mounting system are connected by tilt joint with 27.7° splines, complete...
Technical Details:
It has been designed for transducer mounting at a distance of 309 to 514 mm from the mounting point on the transom. The design consists of the covering transducer fastening (that includes two swivel brackets and radius washers), two telescopic tubes (Ø 20,4 mm, L — 240 mm; and Ø 16,2, L — 220 mm), a male adapter shaped as a 12 pointed star, a spring-loaded...
