Technical details:
Designed to expand the working space on the vessel. Сonsists of 3 sections, connected at 3 points with washers, M6*25 DIN 912 screws and M6 DIN 985 nuts. The assembly includes five Fs219 mounts, 3 of which are fastened under the table surface with 12 6.3*25 DIN 9200 self-tapping screws. Two other mounts are installed at the corners of the working surface w...
Technical details:
Designed to expand the working space on the vessel. The design consists of 2 sections, connected at 3 points with washers, M6*25 DIN 912 screws and M6 DIN 985 nuts. The assembly includes four Fs219 mounts, 2 of which are fastened under the table surface with eight 6.3*25 DIN 9200 self-tapping screws in such a way that adapters can be fixed in them. Two oth...
Technical Details:
This onboard ladder is designed for safe diving and getting out of the water. The folding ladder has three sections, four steps and consists of ten pieces of Ø 32 mm tube, jointed with 27.7° splines, the tilt position of which is fixed with an M6 DIN 934 hex knob nut and M6*60 DIN 933 screws. Equipped with two male adapters shaped as a 12 pointed star, whi...
Technical Details:
Designed for installing accessories on the belly boat (float tube). Consists of a Ø 32 mm tube, two adapters, Dp230 washers with 7.5° splines, an M6*45 DIN 912 screw and an M6 DIN 985 self-locking nut. The assembly includes three FMr132 systems and the Fs223 mount, attached to the pad at the end of the tube with the T-bolt. The elements of the FMr132 syst...
Technical Details:
It has been designed for mounting of the Garmin Panoptix LiveScope transducer. The assembly also includes the compact mount, which allows the plate for fish finders to be installed. The design consists of two eccentric tubes Ø 20,4 mm: L — 530 mm and L — 170 mm, which are connected by the two-component clamp. The assembly also includes a tube (L — 120 мм),...
Technical details:
The system is designed for mounting accessories provided with male adapters on tubes of Ø 30 and 32 mm. Consists of an Fs219 mount and a pad, the two parts of which are fastened together with four M6*30 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*16 DIN 912 side screws and M6 DIN 934 nuts. The mount ...
Technical Details:
Designed for installation of fish finders with a screen diagonal from 9″ to 12″. Consists of a plate (220 x 52 mm), a mount with female adapter, screwed on its back side using an M6*16 DIN 965 screw and an M6 nut DIN 985, a male adapter with a 27.7° splines tilt joint completed with 7.5° washers (Dp230 model), reinforced with an M6*25 DIN 931 bolt. The til...
Technical Details:
It has been designed for mounting of the Garmin Panoptix LiveScope transducer. The assembly also includes the compact mount, which allows the plate for fish finders to be installed. The design consists of two eccentric tubes Ø 20,4 mm: L — 530 mm and L — 170 mm, which are connected by the two-component clamp. The assembly also includes a tube (L — 120 мм),...
Technical Details:
Designed for fixing from 1 to 7 accessories provided with a male adapter shaped as a 12 pointed star. The design comprises a tube (Ø 32 mm, L — 700 mm), three FMr132 mounting systems, two RLp032 collars with male adapters (assembly of each includes an M6*40 DIN 933 screw, an M6 DIN 934 nut, an M6*35 DIN 931 bolt and a hex knob). Parts of each FMr132 mounti...
Technical Details:
Designed for mounting fish finders with a screen diagonal from 9″ to 12″. The structure consists of a plate (220 x 52 mm), a compact mount with a male adapter shaped as a 12 pointed star, which is screwed on the back side of the platform using an M6*16 DIN 965 screw and an M6 DIN 985 self-locking nut, an Ab038 male adapter with a 1.5″ (38 mm) ball, an Sb03...
Size M - Designed for fixing from 1 to 6 accessories provided with a male adapter shaped as a 12 pointed star. The design comprises a tube (Ø 32 mm, L — 500 mm), three FMr132 mounting systems, two RLp032 collars with male adapters (each collar includes an M6*40 DIN 933 screw, an M6 DIN 934 nut, an M6*35 DIN 931 bolt and a hex knob). Parts of each FMr132 system are fastened t...
Size M - Designed to expand the working space on the vessel. The design consists of 2 sections, connected at 3 points with washers, M6*25 DIN 912 screws and M6 DIN 985 nuts. The assembly includes four Fs219 mounts, 2 of which are fastened under the table surface with eight 6.3*25 DIN 9200 self-tapping screws in such a way that adapters can be fixed in them. Two other mounts ...
Technical Details:
Is designed to hold three spinning rods. Consists of two rod-racks and a pair of FMp224 mounting systems. The design of each rack comprises a Ø 20 mm tube of 430 mm length, and three pairs of brackets with elastic clamps. The tube is connected with an adapter, which is fixed in the mount of the FMp224 system, by a tilt joint with 15° splines. To fix a tilt...
Technical Details:
It has been designed for installation of the fish finder on the different vessels. The assembly includes the Sl223 plate and the transducer mount. The plate (106 х 98 mm, the wall thickness is 3 mm) is equipped with a male adapter shaped as a 12 pointed star which rotates 360°. The plate is connected to the tube (Ø 20,4 mm, L — 170 mm) which is attached to...
Technical Details:
The kit has been designed for installation of fish finder monitor and transducer on the PVC boats. The design comprises the Ft450 set for mounting of the fish finder and the transducer, and the Fp224 mounting system. The assembly includes the plate for fish finder and the telescopic holder for mounting the sonar at a depth from 295 to 490 mm. The swivel p...
Technical Details:
The kit has been designed for installation of the fish finder and transducer on board of inflatable boats which are equipped with T-Track mounting pads. It comprises the Ft450 assembly for installation of the monitor and the transducer and the Fs218 mount with a bottom T-Bolt. The telescopic transducer arm mount allows the equipment to be mounted at a dept...
Technical Details:
The kit has been designed for installation of a fish finder monitor and a transducer on PVC boats. The assembly includes the Ss223 plate for fish finder and telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate (164 х 68 mm) has a male adapter shaped as a 12 pointed star and is connected ...
Size S - Is designed for mounting from 1 to 5 accessories provided with male adapters shaped as a 12 pointed star. The design comprises a tube (Ø 32 mm, L — 350 mm), two FMr132 mounting systems and an Fs219 mount attached to a mounting pad (the elements of which are fastened together around the tube with four M6*60 DIN 912 screws and M6 DIN 934 nuts) which is attached to a m...
Technical Details:
Designed for mounting action cameras at a distance of up to 1046 mm from the installation point. The structure consists of a 1/4'' screw thread and a 2-to-3 mounting connector, fastened to a telescopic two-stage tube (adjustable in length from 460 to 1046 mm) by a spline joint. The tube is fastened to a male adapter shaped as a 12 pointed star using a 27.7...
