Technical Details:
Designed for mounting an action camera at a distance of 400 mm from the place of installation on the vessel. The assembly includes an Ng002 swivel-tilt camera holder and an Ex400 extender. The design of the holder consists of a bracket with a 1/4'' screw thread, a 2-to-3 GoPro mounting connector with an M5*30 DIN 931 bolt, an M5 DIN 934 nut with a square k...
Technical details:
Designed for fixing onboard the Gl221 set of camping cups: 3 big cups (150 ml) and 3 short cups (60 ml), or other cups with the volume of 150 to 200 ml and of 50 to 100 ml. The design consists of six cup holders made of food-grade stainless steel, the base of the holder is connected to an adapter by an M6*60 DIN 933 bolt. The cup holders unfold according t...
The holder secures the front leg of the electric motor and keeps it stable during transport. The holder mounts to any "Fasten" lock, and the "Fasten" lock can be mounted on any surface (C-channel, solid surface, PVC pipe) using mounting brackets. The maximum length of the arm without a mounting point is 310 mm. Suitable for motors with a shaft diameter of up to 25 mm
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMp225 mounting system for installing on the inflatable PVC cylinder. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, a tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 20 kg. The design consists of a cast body with 27.7° side splines, a stopper with a cord for releasing a rope or belt, a spring, a roller, as well as an As222-1 reinforced male adapter with double-sided splines shaped as a 12 pointed star, connected to the holder body and an end washer by tilt...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The kit includes an Al002 holder and an FMp224 mounting system. The design of the holder comprises a cast body with a male adapter shaped as a 12 pointed star, a stopper with a cord for releasing a rope or belt, a spring and a roller. Fits for a halyard Ø up to 10 mm and a belt up to 35 ...
Technical Details:
Designed for fixing accessories with a male adapter shaped as a 12 pointed star to rails and tracks of Ø from 19 to 48 mm, and using an extender — of Ø from 42 to 70 mm. Consists of two Fs219 mounts and a clamp mounting pad. The clamp is designed in the form of 2 jaws, fastened together with an M6*110 DIN 931 bolt which serves as an axis and a Kn222 knob w...
Technical Details:
The kit includes an Ht213 spinning rod holder and an Fs218 accessory mount equipped with a bottom T-bolt. It has been designed for mounting a spinning rod on the T-Track of fishing kayaks. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, a tilt 27.7° splines joint, completed with 7.5° s...
Technical Details:
The kit includes the round plate (Ø 63 mm) and the Mx mounting system. It has been designed for mounting equipment with a flat base and flat objects on the PVC boat boltrope. The 27.7° side splines of the plate are connected with the mounting system splines, the assembly includes two Dp230 7.5° washers, an M6*60 DIN 933 bolt, an M6 DIN 985 nut, a spring an...
Technical details:
Is intended for lowering and hoisting anchors weighing up to 8 kg. The set includes an Al003 holder and an FMb mounting system. The design comprises a cast body with 27.7° side splines, a stopper with a cord for releasing a rope or belt, a spring, a roller, a male adapter shaped as a 12 pointed star, which is connected to the holder body by tilt joint equi...
Technical Details:
Designed for use as an oarlock in a pair with oars, the diameter of which is Ø 32 mm, as well as for creating additional structures with tubes of the same diameter. The assembly includes a Cn032 clamp, consisting of a one-piece cast bracket made of fiberglass-reinforced polyamide, fastened together with an M6*40 DIN 933 bolt of A2 (AISI 304) stainless stee...
Technical Details:
Designed for mounting accessories provided with a male adapter shaped as a 12 pointed star on the T-Track of motorboats and kayaks. The system consists of an Fs219 mount and a mounting pad, which is fixed to the track using two clamps (32 х 16,5 х 6 mm), attached with two M6*40 DIN 931 screws and M6 DIN 934 nuts. The assembly includes a set of caps that pr...
Technical Details:
The system is designed for mounting accessories provided with male adapters on tubes of Ø 22 and 25 mm. Consists of two Fs219 mounts and a pad, parts of which are fastened together with four M6*55 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*20 DIN 912 side screws and M6 DIN 934 nuts. Both mounts compr...
Technical Details:
The system is designed for mounting accessories provided with male adapters on tubes of Ø 30 and 32 mm. Consists of two Fs219 mounts and a pad, parts of which are fastened together with four M6*60 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*20 DIN 912 side screws and M6 DIN 934 nuts. Both mounts compr...
Technical Details:
Designed for mounting accessories provided with a male adapter shaped as a 12 pointed star on T-Tracks. Consists of an Fs219 mount and a pad equipped with 2 metal clamps (32 x 16.5 x 6 mm), fastened with two M6*40 DIN 931 bolts and M6 DIN 934 nuts. The assembly includes a set of caps that protect the clamps from rusting, and a set of caps for installation ...
Technical Details:
Is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on inflatable PVC belly boats (float tubes). The kit includes two Fs219 mounts and a strap holding system. Strap length is 1.5 m, width — 35 mm. Each of the mounts is attached to a pair of strap holders and an end plug with four M6*20 DIN 912 screws and M6 DIN 934 ...
Technical Details:
This mount is designed for fixing accessories at the distance of 220 mm from an installation place. The assembly includes a mount, an extender (L — 205 mm) and an adapter with 27.7° side splines. On the one side the extender is fastened together with the mount for accessories and on the other — with the adapter. Both joints have 27.7° splines and are equip...
Technical Details:
Designed for fixing accessories at a distance of 100 mm from the installation place on the vessel. Includes a Ø 50 mm mount with side 27.7° splines, an Ex100 extender and an adapter. The extender is connected with the splines of the mount from one end, and with the splines of the adapter from the other end. Both joints fastened with M6*40 DIN 933 bolts and...
Technical details:
Designed for fixing accessories at a 250 mm distance from installation place. The assembly includes a compact mount inserted into an extender tube. Its 27.7°side splines are connected to the adapter's splines using an M6*50 DIN 933 screw and an M6 DIN 934 nut. The tilt position is fixed with a hex knob. The design comprises both male (for installation on t...
Technical Details:
Designed for fixing spinning rods with different types of reels and handle diameter of up to 38 mm during fishing and transportation. The design comprises the holder body, the retainer, an end limiter, a male adapter shaped as a 12 pointed star and the tilt 27.7° spline joint complete with 7.5° spline adapter washers and a spring. The tilt position is fixe...
