Technical Details:
The system is designed for mounting accessories provided with male adapters on Ø 22 and 25 mm tubes and rails. Consists of a Fs219 mount and a pad, the two parts of which are fastened together with four M6*30 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*20 DIN 912 side screws and M6 DIN 934 nuts. The m...
Technical Details:
Is designed for mounting flat objects and equipment with a flat base. It can be used for connection of two Fs219 mounts and creation of the design with a remote mount. The plate diameter is 63 mm. It is connected with the adapter by an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The design allows the plate to be 360° rotated around the axis in ...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The design consists of a cast body with a male adapter shaped as a 12 pointed star, a stopper with a cord for releasing a rope or belt, a spring and a roller. Suitable for a halyard of Ø up to 10 mm and a belt up to 35 mm wide and up to 2.5 mm thick. The assembly includes fasteners: two ...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The design consists of a cast body with a male adapter shaped as a 12 pointed star, a freely rotating roller and a D-shaped guide ring. The adapter is equipped with an O-ring. The assembly includes fasteners: two M6*55 DIN 912 screws and two M6 DIN 985 self-locking nuts. Fits for a halya...
Technical Details:
Designed for fixing objects with a diameter of from 20 mm to 50 mm. The design consists of a bracket with special external protrusions for fixing the elastic clamp. The inner part of the bracket is covered with a polyurethane pad. a male adapter shaped as a 12 pointed star provides the ability to 360° rotate the holder around the axis without having to rem...
Technical details:
Designed to extend the distance between the accessory and the mount in which it is fixed by 160 mm. The design consists of a Ø 25 mm, L — 90 mm tube, 2 connectors with side 27.7° splines located along its edges, a spring, an M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. The plastic details are made of fiberglass-reinforced polyamide. T...
Technical Details:
The system is designed for mounting accessories provided with male adapters on PVC inflatables. Consists of an Fs219 mount and a mounting pad (110 x 110 mm), reinforced with a polyamide washer. The mount comprises a female adapter. Fastened to the pad with four M6*20 DIN 912 screws and M6 DIN 934 nuts. The system is glued on the surface using two-component...
Technical Details:
Is designed for mounting accessories provided with adapters with male adapters shaped as a 12 pointed star on aluminium boats and fishing kayaks equipped with a T-Track. The design comprises Ø 50 mm accessory mount with side 27.7° splines fastened together with a washer that provides a conversion from spline connection to T-slot, universal T-bolts (45 x 25...
Technical Details:
This mount is designed for fixing accessories provided with male adapters shaped as a 12 pointed star, and adding them a tilt option. The design comprises an accessory mount and an adapter with 27.7 side splines fastened together in tilt joint with M6*50 DIN 931 bolt and an M6 DIN 934 nut. For fixing a tilt position is intended the hex knob nut. The mount ...
Technical details:
Designed for fixing a flashlight and other objects with a diameter of 15 to 25 mm. The design consists of an elastic clamp and a holder body, which is covered with an elastic soft insert inside. The body of the holder has projections for fixing of the clamp and is connected to the male a male adapter shaped as a 12 pointed star by 15° spline tilt joint. Th...
Technical details:
Designed for mounting accessories on T-tracks of aluminium motorboats and fishing kayaks. The set consists of two T-shaped clamps, each of which is 45 mm long, two square plastic knobs, two M6*40 DIN 931 bolts, and two M6 DIN 934 nuts, as well as a set of plastic nozzles protecting metal clamps from rusting. Clamps are made of A2 (AISI 304) stainless steel...
Technical details:
Designed to hold various drinks and to keep things on board organized. The design consists of a holder body and a retainer that has three positions: open, close and half-close (for fixing the mug handle), as well as a swivel male adapter shaped as a 12 pointed star. The holder can be 360° rotated without having to remove it from the mount. Paired oblong ho...
Technical details:
Designed for mounting various carp gear. The design consists of an adapter with bottom external splines shaped as a 12 pointed star, and a disk, equipped with a standard thread for carp gear. The adapter has an O-ring. The diameter of the top part of the adapter is 34 mm. The main parts are made of fiberglass-reinforced polyamide.
Product description:
This...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on the hard deck or side of boats and fishing kayaks. Can be attached to aluminum, fiberglass, polyethylene or wood surfaces. Consists of a Fs219 mount and a round mounting pad. The mount comprises a female adapter. The mount and the mounting pad are con...
Technical details:
Designed to extend the distance between the accessory and the mount in which it is fixed by 205 mm. The design consists of a Ø 25 mm, L — 155 mm tube, 2 connectors with side 27.7° splines located along its edges, a spring, an M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. The plastic details are made of fiberglass-reinforced polyamide. ...
Technical details:
Designed to extend the distance between the accessory and the mount in which it is fixed by 305 mm. The design consists of a Ø 25 mm, L — 255 mm tube, 2 connectors with side 27.7° splines located along its edges, a spring, an M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. The plastic details are made of fiberglass-reinforced polyamide. ...
Technical Details:
It is intended for installation on a vessel of awning tubular structures with an inner tube diameter of 32 mm or an outer diameter of 22 mm. The design consists of a tube joint, fastened to a male adapter shaped as a 12 pointed star by a U-joint. The assembly includes fasteners: two M6 DIN 125 washers, two self-locking M6 DIN 985 nuts, an M6 DIN 934 nut, a...
Technical Details:
It is intended for use as an oarlock in a pair with oars, the diameter of which is Ø 35 mm, as well as for creating additional structures with tubes of the same diameter. The design includes a clamp, consisting of a bracket made as a one-piece cast of fiberglass-reinforced polyamide, fastened together with an M6*40 DIN 933 bolt of A2 (AISI 304) stainless s...
Technical Details:
Designed to mount accessories provided with a male adapter shaped as a 12 pointed star on T-Tracks of fishing kayaks, as well as (using additional mounting pads) on hard surfaces and on a cylinder of PVC inflatables. The structure consists of a mount body Ø 50 mm, a retainer, a universal T-bolt (45 х 25 х 12 mm) and an M6 DIN 934 nut, completed with a squa...
Technical Details:
The mounting pad is designed for installation of T-Track adapters of any models on the hard deck or side of the vessel (fiberglass, aluminum, polyethylene, or wood surfaces). The length of the pad is 255 mm. It is a one-piece product, the design of which provides a T-Track, repeating the shape of tracks at most kayaks and motorboats. It can be fastened to ...
