Technical Details:
The plate is designed for fixing fish finders and other equipment that have mounting points with the distance between them up to 150 mm. The assembly consists of a 164 х 68 mm plate with a wall 3 mm thick, connected together with a tilt adapter using an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The assembly also includes an adapter washer tha...
Technical Details:
Is designed for mounting flat objects and equipment with a flat base. It can be used for connection of two Fs219 mounts and creation of the design with a remote mount. The plate diameter is 63 mm. It is connected with the adapter by an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The design allows the plate to be 360° rotated around the axis in ...
Technical details:
Designed to install in BORIKA FASTen® mounting systems accessories from different manufacturers designed to be mounted on a 1.5" (38 mm) ball. The design consists of an adapter made as a one-piece molded product of fiberglass reinforced polyamide, on the bottom side of which there are splines for installation in the mount, and on the upper — the base for t...
Technical details:
Is intended for making assemblies with RAM® accessories. The set includes 2 Rf264-2 adapters. The design of each comprises an adapter shapes as a 12 pointed star, and a connector with 30° internal short splines, connected to a fastening for RAP-B-366U with an M6*70 DIN 912 screw and an M6 DIN 985 self-locking nut. Each of the adapters is equipped with an O...
Technical Details:
The plate is designed for installing fish finders and other equipment with the distance between mounting points up to 95 mm. The assembly consists of a 106 x 98 mm and 3 mm thick plate, connected with a swivel adapter using an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The assembly also includes an adapter washer that allows for fully rotating...
Technical details:It is intended for connection together of two BORIKA FASTen® accessory mounts. The design consists of two connectors with adapters shaped as a 12 pointed stars and side 27.7° splines fastened in a tilt joint with an M6*55 DIN 933 bolt and a hex knob nut. The joint comprises 2 washers with 7.5° splines, and a spring. Each adapter is equipped with an O-ring. ...
Technical details:
Designed to extend the distance between the accessory with 15° spline tilt joint and the mount in which it is fixed by 154 mm. The design consists of a tube (Ø 22 mm, L — 120 mm) and 2 connectors located along its edges. The assembly also comprises an M6*30 DIN 931 bolt, a square knob with an inserted M6 DIN 934 nut, and 2 washers with 15° splines. The pla...
Technical Details:
Is designed for mounting accessories provided with adapters with male adapters shaped as a 12 pointed star on boats and fishing kayaks equipped with a T-Track. The design comprises Ø 48 mm height 41 mm accessory mount and a universal T-bolt (45 x 25 x 12 mm), fastened below. The mount comprises a female adapter. To install accessories, switch the locking m...
Technical Details:
The set includes two Oh032 holders, which are designed for fixing oars, paddles and tubes with a diameter of from 32 to 35 mm. Each product is made as a one-piece part of fiberglass-reinforced polyamide. The male adapters of each holder are shaped as 12 pointed stars and equipped with O-rings.
Product description:
Each of these holders is suitable for hol...
Technical Details:
Designed to fix holders, arm mounts, rigging, tubular structures and other accessories provided with a male adapter shaped as a 12 pointed star. The diameter of the mount is 61 mm, it includes a female adapter. The mount can be fastened directly on the hard deck or side of the vessel (fiberglass, polyethylene, wood, aluminum surfaces) or installed using s...
Technical Details:
Designed for mounting a lighting (a flashlight) on holders for an action camera equipped with an additional 2-to-3 GoPro mounting connector. The design consists of a bracket that is fixed in the mounting connector of the camera holder, a swivel mechanism that allows you to 360° rotate the holder along with the lighting (a flashlight); an inner pad and an e...
Technical Details:
Designed for installation of awning tubular structures on a vessel. The design consists of a male adapter shaped as a 12 pointed star, U-joint axle, plastic washer and M6 DIN 125 washer, an M6 DIN 934 self-locking nut, an M6*25 DIN 912 screw. The adapter is equipped with an O-ring. The main parts are made of fiberglass-reinforced polyamide. Fasteners — of ...
Technical Details:
It is intended for installation on a vessel of awning tubular structures with an outer tube diameter of 22 mm. The design consists of a body with a male adapter shaped as a 12 pointed star and a plastic tube holder, fastened together by a U-joint with an M5*20 DIN 912 screw and an M5 DIN 985 self-locking nut. The adapter is equipped with an O-ring. The mai...
Technical Details:
The mounting pad is designed for installation of T-Track adapters of any models on the hard deck or side of the vessel (fiberglass, aluminum, polyethylene, or wood surfaces). The length of the pad is 150 mm. It is a one-piece product, the design of which provides a T-Track, repeating the shape of tracks at most fishing kayaks and aluminium motorboats. It c...
Technical Details:
It is designed for installation of an Fs218 T-Track adapter on the surface of an inflatable vessel. The pad has a radius base, which repeats the shape of the cylinder, its gluing area is 110 x 110 mm. The pad is made of PVC and armored with an insert of fiberglass-reinforced polyamide, in the center of which there is a hole for attaching the T-Bolt of Fs21...
Technical details:
Designed for creating assemblies with accessories that are provided with a tilt joint. The double fixation system allows for reducing the oscillations of the structure and makes it more rigid. The assembly consists of an adapter shaped as a 12 pointed star with side 27.7° splines at the top, a compression plastic nut, and an O-ring. Plastic parts are made...
Technical Details:Designed for installation of an Fs219 mount on the surface of an inflatable vessel. Thanks to the increased gluing area (140 x 140 mm), the pad can be used with accessories that require increased loads. It has been made of PVC and reinforced with a fiberglass-reinforced polyamide washer with a diameter of 63 mm. The pad is provided with four attachment poin...
Technical details:
Designed to connect together two accessory mounts. The design consists of two parts, equipped with adapters shaped as 12 pointed stars, which are connected together by a swivel connector. Such a design provides the 360° rotation around the adapter axis in 7.5° increments. The assembly includes an M6*70 DIN 912 screw and an M6 DIN 985 nut. Both sides of the...
Technical Details:
Designed for fastening the rope knot when mooring. The bollard design has a hole for passing a rope or attaching carabiners. The bollard is made as a one-piece molded product of fiberglass-reinforced polyamide. The male adapter is shaped as a 12 pointed star, and equipped with an O-ring.
Product description:
The Fc229 mooring bollard is a versatile riggin...
Technical Details:
Designed for attaching cords and carabiners on the vessel. The design consists of a D-shaped shackle and a male adapter shaped as a 12 pointed star, equipped with an O-ring. The assembly also includes an M6*30 DIN 912 screw. The main parts are made of fiberglass-reinforced polyamide. Fasteners — of A2 (AISI 304) stainless steel.
Product description:
The D...
