Al004

Technical details:
It is intended for lowering and hoisting anchors weighing up to 20 kg. The design consists of a cast body with 27.7° side splines, a stopper with a cord for releasing a rope or belt, a spring, a roller, as well as an As222-1 reinforced male adapter with double-sided splines shaped as a 12 pointed star, connected to the holder body and an end washer by tilt joint with Dp230 7.5° spline washers. The tilt position is fixed using an M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. Fits for a halyard Ø up to 10 mm and a belt up to 35 mm wide and up to 2.5 mm thick. The assembly also includes fasteners: two M6*55 DIN 912 screws, and two M6 DIN 985 self-locking nuts. The adapter is equipped with an O-ring. The main parts are made of fiberglass-reinforced polyamide. Fasteners and the spring are made of A2 (AISI 304) stainless steel (except for an M6 DIN 934 brass nut).

Product description:
This is a reinforced model of the holder, designed for use with anchors weighing up to 20 kg. Its feature is an adapter reinforced with a steel plate, which allows the holder to easily withstand increased dynamic loads.
Is suitable for holding an anchor on various types of vessel. Fits for a halyard up to 10 mm and belts up to 35 mm wide and up to 2.5 mm thick.
The tilt design is convenient for use on inflatable boats: the holder fixes the anchor overboard in such a way that the rope does not touch the surface of the inflatable cylinder during lowering and hoisting.
The tilt position of the holder can be 180° adjustable in 7.5° increments.
The spring-loaded locking system automatically fixes the anchor: just pull the rope while hoisting the anchor.
For easy lowering, a releasing system is provided: just pull the cord on the holder body.
A convenient roller makes it easier to slide a belt or halyard.
The holder can be installed in any BORIKA FASTen® mounting system, designed for high loads.
Materials: fiberglass-reinforced polyamide, A2 (AISI 304) stainless steel.
In the package: an Al004 anchor holder.
Tips on using & installation:
By attaching a longer rope to the releasing cord, the user gets the opportunity to release the anchor halyard while being at a distance from the holder.
The tilt joint and double-sided splines of the adapter also allows for creating various assemblies: for example, connecting the holder with an anchor roller and an extender.
To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.