BORIKA Garmin Panoptix LiveScope Transducer Holder in the Assembly with the Mount LSp1000

Technical Details:
It has been designed for mounting of the Garmin Panoptix LiveScope transducer. The assembly also includes the compact mount, which allows the plate for fish finders to be installed. The design consists of two eccentric tubes Ø 20,4 mm: L — 530 mm and L — 170 mm, which are connected by the two-component clamp. The assembly also includes a tube (L — 120 мм), which is connected to the structure by a tilt joint with 7.5° splines and a mount, which is connected to the tubes by a bracket with a swivel joint with 7.5° splines. There are five square knob nuts for fixation of the selected position of the tilt and swivel joints. The main parts are made of fiberglass-reinforced polyamide. The tube is made of anodized aluminium with powder coating. Fasteners ( four M6 and two M4 DIN 985 nuts, five M6*40 DIN 933 bolts and four M4*20 DIN 912 screws, an M6*30 and an M6*50 DIN 912 screws) and a spring — of А2 (AISI 304) stainless steel (except for five M6 DIN 985 brass nuts).

Product description:
This arm mount is designed especially for mounting the Garmin Panoptix LiveScope™ transducer — a unique high-tech gadget with bottom and side scan functions, self-adjusting viewing angle and a system for a real-time fish indication — on board various types of boats. It is also suitable for side-mounted transducers.
This model of the holder includes a compact mount, where any BORIKA FASTen® plate for the fish finder monitor can be fixed. Using the conversion adapters you can also fix accessories of other brands ( SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, etc.).
Fixing of the plate is carried out on the ROLL & LOCK principle: the mount body turns counterclockwise, which moves the locking mechanism to the open position, then the adapter is pushed into the mount all the way in and the mount turns clockwise, clamping teeth of the accessory adapter.
The design allows the transducer arm mount to be adjusted to a comfortable configuration during use and fix it compactly in the raised position. It can be easily adjusted in width of board and in the immersion depth (up to 1 m).
The design provides a handle that allows the user to adjust the angle of view with 360° rotation, which is important for the Garmin Panoptix LiveScope™ transducer with bottom and side scan functions and real-time fish indication system.
The adapter of the arm mount is compatible with all BORIKA FASTen® mounting systems. Using the conversion adapters you can also fix it in mounting systems from other manufacturers ( SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, etc.).
Materials: fiberglass-reinforced polyamide, anodized aluminium with powder coating, A2 (AISI 304) stainless steel, brass.
In the package: an LSp1000 transducer arm mount.
Tips on using & installation:
The structure can also be supplemented with a universal set of transducer fastenings, which makes it possible to install with its help equipment of many modifications. This set includes a fastening with a 50 mm bolt, radius washers and a knob nut and the expanding (covering) fastening system with swivel brackets, radius washers and “fins”.
To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.