BORIKA Spinning Rod Holder with the Kit for Installation on a T-Track of Boats (Ht213 + FMa) HTa213

Technical Details:
The kit includes an Ht213 spinning rod holder and an FMa mounting system for mounting of spinning rod on the T-Track of kayaks. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an M6 DIN 934 nut with a hex knob) and a male adapter shaped as a 12 pointed star. The Fs219 mount and the mounting pad are fastened with four M6*20 DIN 912 screws and M6 DIN 934 nuts. You can insert the pad into the T-Track and fix it into the selected place of the profile with two universal T-bolts and a knob nut. The main parts are made of fiberglass-reinforced polyamide. Fasteners — of A2 (AISI 304) stainless steel (except for three M6 DIN 934 brass nuts).



Product description:
The kit of this model (Ht213 + FMa) has been designed for spinning rod installation on a T-Track. It can be used both on the tracks of fishing kayaks, directed upwards, and on the tracks of aluminium boats, directed into the inner space of the vessel.
The holder is suitable for spinning rods with a handle diameter up to 38 mm and for different types of reels: inertia, electric, baitcasting (multiplier) and fixed-spool — thanks to a special cut located in the front of the holder.
The handle of the spinning is securely fixed with a retainer in the body, which protects the tackle from loosing and falling into the water during trolling, when biting large fish and during transportation. It allows you to quickly get out the rod if necessary.
There is an end stopper at the rear of the holder, which serves as a limiter and prevents axial rotation of rods with the end cruciform slot. It also can be taken off when fixing long-handled spinning rods.
At the bottom of the holder there is a hole for attaching a safety leash carabiner, which allows you to maximally protect the tackle from loss.
The design of the holder provides full control over the process of fishing and trolling: it allows for adjusting the tilt angle with 7.5° increments: you can fix the spinning rod vertically or horizontally. The selected tilt position is secured by tightening the hex knob nut.
The mounting system is designed for medium and increased loads. The assembly includes one Fs219 mount and a mounting pad which can be installed on the T-Track using two universal T-bolts. Four fastening points ensure additional strength of the system. The pad allows the second Fs219 mount to be installed.
The Fs219 mount is compatible with all BORIKA FASTen® accessories as well as accessories and devices from other brands ( SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, carp fishing tackles) when using conversion adapters.
Fixing is fast and simple: after removing the protective plug, switch the locking mechanism into the UNLOCK position, insert the adapter all the way into the mount, and move the retainer into the LOCK position. The accessory can be fixed in any position by rotating the adapter around the axis in 30° increments.
Materials: fiberglass-reinforced polyamide, PVC, A2 (AISI 304) stainless steel, brass.
In the package: an Ht213 spinning rod holder, an FMa mounting system.
Tips on using & installation:
In order to install the mounting system on the track, you have to insert the T-bolts into the T-Track, move the system to the selected place and secure it in the selected position with the knob nuts. You don't need any additional tools for installation.
The holder and the adapter, which are fixed in the mount, are connected by the tilt 27.7° spline joint. You can separate them and the structure can be supplemented with BORIKA FASTen® extenders with the same slot size and lengths from 10 to 30 cm, allowing the accessory to be carried overboard or raised above the installation surface, which is especially convenient, for example, for using spinning rods with long handles.
Pay attention that the reliability of the structure depends not only on the strength of the mount and the pad, but also on the strength of the T-Track. Therefore, it is not recommended installing on FMa accessories that are expected to be dynamically loaded (for example, spinning rod holders with long extenders) and anchor holders paired with anchors weighing over 8 kg).
To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.