HTr213_2

Technical Details:
The kit includes an Ht213 spinning rod holder and an FMr132 mounting system for installation on tubes Ø 30/32 mm. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an M6 DIN 934 nut with a hex knob) and a male adapter shaped as a 12 pointed star. The FMr132 system consists of an Fs219 mount and a mounting pad, fastened with four M6*20 DIN 912 screws and M6 DIN 934 nuts. The two components of the pad are connected by four M6*30 DIN 912 screws and M6 DIN 934 brass nuts. Fixed to the tube by means of two M6*16 DIN 912 side screws, preventing axial rotation. The kit includes fasteners, an elastic liner for tubes Ø 30 and a hex wrench. The main parts are made of fiberglass-reinforced polyamide. Fasteners — of A2 (AISI 304) stainless steel (except for five M6 DIN 934 brass nuts).

Product description:
The kit (Ht213 + FMr132) is a perfect solution for mounting the spinning rod on any tube or rail of 30 or 32 mm in diameter. Allows for immovable fixation of the spinning rod holder, avoiding axial rotation and sliding, even under increased dynamic loads, which are common for trolling fishing.
Ht213 is a universal rod holder, suitable for spinnings with a handle diameter of up to 38 mm and different types of reels: inertia, electric, baitcasting (multiplier) and fixed-spool.
The handle of the spinning is securely fixed with a ring retainer, which protects the tackle from falling into the water, when biting large fish and during transportation. The retainer allows for quickly getting out of the spinning rod if necessary.
A stopper at the rear of the holder serves as a limiter and prevents axial rotation of the spinning rods with a cruciform slot in the end of the handle.
To maximally protect the tackle from loss, the holder has a hole for attaching a safety leash carabiner.
The holder and the adapter, which is fixed in the mount, are connected by a tilt joint with 27.7° splines. For more precise tilt adjustments adapter washers with 7.5° splines are included to the assembly.
The mounting system included in the kit is designed for high loads and suits for fixing any BORIKA FASTen® accessories: fish finder plates and transducer arm mounts, action camera monopods, navigation lights, rigging, awnings, trolling stands, etc. With conversion adapters, which are presented in the BORIKA FASTen® catalog, you can fix in the mount some accessories and devices from other brands ( SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, carp fishing tackles, etc.).
The mount has four attachment points to the pad. This provides additional strength under increased loads. By loosening the screws which fasten together the parts of the pad, the system can be easily rotated around the rail axis and moved along the tube.
The Ht213 spinning rod holder can be easily rearranged into any other BORIKA FASTen® mount located in another place of the vessel, and also can be quickly got out after the end of fishing. Fixation is fast and simple: switch the locking mechanism into the UNLOCK position, insert an adapter all the way into the mount, and move the retainer into the LOCK position. You can rotate the holder in 30° increments.
Materials: fiberglass-reinforced polyamide, PVC, A2 (AISI 304) stainless steel, brass.
In the package: an Ht213 spinning rod holder, an FMr132 mounting system, fasteners (two M6*16 DIN 912 and two M6 DIN 934 nuts), a hex wrench, a step-by-step installation guide.
Tips on using & installation:
Installation of the FMr132 mounting system does not require drilling and should be carried out in accordance with a step-by-step guide, supplied with each kit.
For immovable fixation use two provided side screws, which prevent sliding and axial rotation of the pad.
The elastic liner allows the system to be installed on tubes with a diameter of 30 mm and provides additional protection against dents on the rail when using the fixing side screws.
The kit can be installed on the tube of almost all round rails and support stands from the BORIKA FASTen® range: GRp500, STp140, STp110, etc.
The package also includes a hex wrench, which can be used to unscrew the mount from the pad when installing accessories designed for mounting under the Fs219.
Separating the splines you can supplement the holder with BORIKA FASTen® extenders from 10 to 30 cm with the same splines, allowing the accessory to be mounted overboard or above the installation surface, which is especially convenient, for example, for using spinning rods with long handles.
To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.