Technical Details:
Designed for use as an oarlock in a pair with oars, the diameter of which is Ø 32 mm, as well as for creating additional structures with tubes of the same diameter. The assembly includes a Cn032 clamp, consisting of a one-piece cast bracket made of fiberglass-reinforced polyamide, fastened together with an M6*40 DIN 933 bolt of A2 (AISI 304) stainless stee...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The kit includes an Al002 holder and an FMp224 mounting system. The design of the holder comprises a cast body with a male adapter shaped as a 12 pointed star, a stopper with a cord for releasing a rope or belt, a spring and a roller. Fits for a halyard Ø up to 10 mm and a belt up to 35 ...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMp225 mounting system for installing on the inflatable PVC cylinder. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, a tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 20 kg. The design consists of a cast body with 27.7° side splines, a stopper with a cord for releasing a rope or belt, a spring, a roller, as well as an As222-1 reinforced male adapter with double-sided splines shaped as a 12 pointed star, connected to the holder body and an end washer by tilt...
Technical Details:
Designed to mount accessories with a male adapter shaped as a 12 pointed star on T-Tracks of motorboats and kayaks. The system consists of two Fs219 mounts and a mounting pad which moves along the track and is fixed in the selected place using 2 universal T-bolts (45 х 25 х 12 mm) and M6 DIN 934 nuts with plastic knobs. Each of the mounts is attached to th...
Technical Details:
The system is designed to mount accessories provided with a male adapter shaped as a 12 pointed star on tubes of Ø 20 — 32 mm and surfaces from 10 to 32 mm thick without drilling. Consists of an Fs219 mount and a bench mounting pad. The design of the bench pad includes a bracket, the inner upper part of which is covered with PVC, a clamp with an M3.2 DIN 6...
Technical Details:
The assembly includes a Ht213 spinning rod holder and an Mx mounting system, designed for installation on the boltrope of PVC inflatables (motorboats and belly boats). The design of the holder comprises a retainer, an end limiter and a hole for a safety carabiner. The holder and a the mounting system are connected by tilt joint with 27.7° splines, complete...
Technical Details:
It has been designed for transducer mounting at a distance of 309 to 514 mm from the mounting point on the transom. The design consists of the covering transducer fastening (that includes two swivel brackets and radius washers), two telescopic tubes (Ø 20,4 mm, L — 240 mm; and Ø 16,2, L — 220 mm), a male adapter shaped as a 12 pointed star, a spring-loaded...
Technical Details:
Designed for mounting an action camera at a distance of 400 mm from the place of installation on the vessel. The assembly includes an Ng002 swivel-tilt camera holder and an Ex400 extender. The design of the holder consists of a bracket with a 1/4'' screw thread, a 2-to-3 GoPro mounting connector with an M5*30 DIN 931 bolt, an M5 DIN 934 nut with a square k...
Technical details:
Designed for fixing onboard the Gl221 set of camping cups: 3 big cups (150 ml) and 3 short cups (60 ml), or other cups with the volume of 150 to 200 ml and of 50 to 100 ml. The design consists of six cup holders made of food-grade stainless steel, the base of the holder is connected to an adapter by an M6*60 DIN 933 bolt. The cup holders unfold according t...
The holder secures the front leg of the electric motor and keeps it stable during transport. The holder mounts to any "Fasten" lock, and the "Fasten" lock can be mounted on any surface (C-channel, solid surface, PVC pipe) using mounting brackets. The maximum length of the arm without a mounting point is 310 mm. Suitable for motors with a shaft diameter of up to 25 mm
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMp224 mounting system for inflatable PVC cylinders. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, a tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an M6 DIN 93...
Technical Details:
The assembly is designed for installation of the transducer at a distance of 300 mm from the mounting point on the ELLING OPTIMUS belly boats (float tube) boltrope. It includes the transducer arm mount and an Mx mounting system. The design consists of a transducer fastening with an M6*50 DIN 931 bolt and a square knob nut that is connected to the Ø 22 mm (...
Technical Details:
The system is designed to mount accessories provided with a male adapter shaped as a 12 pointed star on tubes Ø 20 — 32 mm and surfaces from 10 to 32 mm thick without drilling. Consists of two Fs219 mounts and a bench mounting pad. The design of the bench includes a bracket, the inner upper part of which is covered with PVC, a clamp with an M3.2 DIN 6799 l...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMr132 mounting system for installation on tubes Ø 30/32 mm. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an...
Technical Details:
It has been designed for installation of the fish finder on the different vessels. The assembly includes the Sl223 plate and the transducer mount. The plate (106 х 98 mm, the wall thickness is 3 mm) is equipped with a male adapter shaped as a 12 pointed star which rotates 360°. The plate is connected to the tube (Ø 20,4 mm, L — 170 mm) which is attached to...
Technical Details:
The set has been designed for installation of a fish finder monitor or a transducer on the PVC boats. The assembly includes the Sl223 plate for fish finder and a telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate 106 х 98 mm has a male adapter shaped as a 12 pointed star and is connec...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMa mounting system for mounting of spinning rod on the T-Track of kayaks. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 93...
Technical Details:
The kit has been designed for installation of a fish finder monitor and a transducer on PVC boats. The assembly includes the Ss223 plate for fish finder and telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate (164 х 68 mm) has a male adapter shaped as a 12 pointed star and is connected ...
