Technical details:
Designed for fixing a flashlight and other objects with a diameter of 15 to 25 mm. The design consists of an elastic clamp and a holder body, which is covered with an elastic soft insert inside. The body of the holder has projections for fixing of the clamp and is connected to the male a male adapter shaped as a 12 pointed star by 15° spline tilt joint. Th...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star in rectangular mounting niches of kayaks and motorboats. Consists of a Fs219 mount and a mounting pad (110 x 53 mm). The mount comprises a female adapter. Is attached to the pad with 4 screws M6*20 DIN 912 and nuts M6 DIN 934. To install accessories, swi...
Technical Details:
The system is designed for mounting on board of PVC inflatables the accessories with male adapters shaped as a 12 pointed star. It consists of an Fs219 mount and a pad (140 x 140 mm) reinforced with a polyamide washer. The mount comprises a female adapter. Fastened to the pad with four M6*20 DIN 912 screws and M6 DIN 934 nuts. The system is glued using two...
Technical Details:
The system is designed for mounting accessories provided with male adapters on Ø 22 and 25 mm tubes and rails. Consists of a Fs219 mount and a pad, the two parts of which are fastened together with four M6*30 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*20 DIN 912 side screws and M6 DIN 934 nuts. The m...
Technical Details:
Is designed for mounting flat objects and equipment with a flat base. It can be used for connection of two Fs219 mounts and creation of the design with a remote mount. The plate diameter is 63 mm. It is connected with the adapter by an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The design allows the plate to be 360° rotated around the axis in ...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The design consists of a cast body with a male adapter shaped as a 12 pointed star, a stopper with a cord for releasing a rope or belt, a spring and a roller. Suitable for a halyard of Ø up to 10 mm and a belt up to 35 mm wide and up to 2.5 mm thick. The assembly includes fasteners: two ...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The design consists of a cast body with a male adapter shaped as a 12 pointed star, a freely rotating roller and a D-shaped guide ring. The adapter is equipped with an O-ring. The assembly includes fasteners: two M6*55 DIN 912 screws and two M6 DIN 985 self-locking nuts. Fits for a halya...
Technical Details:
Designed for fixing objects with a diameter of from 20 mm to 50 mm. The design consists of a bracket with special external protrusions for fixing the elastic clamp. The inner part of the bracket is covered with a polyurethane pad. a male adapter shaped as a 12 pointed star provides the ability to 360° rotate the holder around the axis without having to rem...
Technical details:
Designed to extend the distance between the accessory and the mount in which it is fixed by 160 mm. The design consists of a Ø 25 mm, L — 90 mm tube, 2 connectors with side 27.7° splines located along its edges, a spring, an M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. The plastic details are made of fiberglass-reinforced polyamide. T...
Technical details:
Designed to extend the distance between the accessory and the mount in which it is fixed by 305 mm. The design consists of a Ø 25 mm, L — 255 mm tube, 2 connectors with side 27.7° splines located along its edges, a spring, an M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. The plastic details are made of fiberglass-reinforced polyamide. ...
Technical details:
Designed to hold various drinks and to keep things on board organized. The design consists of a holder body and a retainer that has three positions: open, close and half-close (for fixing the mug handle), as well as HLt T-Track adapter. Can be mounted on the T-Track of aluminium boats, directed into the inner space of the vessel or on TRk150 and TRk255 mou...
Technical details:
Designed to mount accessories at a distance of 220 mm from the installation place. The assembly includes a compact accessory mount inserted into the extender tube, the tube (L — 180 mm, Ø 32 mm), and a one-piece male to male adapter, reinforced with an M6*25 DIN 931 bolt. The design comprises both male (for installation on the vessel) and female (for fixin...
Technical Details:
Designed for mounting accessories with 27.7° side splines on the boltrope of PVC inflatable vessels. The tilt joint of the pad has double-sided 27.7° splines and includes two Dp230 adapter washers with 7.5° splines, a spring, an end plug, a hex knob and fasteners: M6*60 DIN 933 bolt and M6 DIN 985 nut. The main parts are made of fiberglass-reinforced polya...
Technical Details:
The plate is designed for fixing fish finders and other equipment that have mounting points with distance between them up to 95 mm. The plate area is 106 x 98 mm, the wall is 3 mm thick. On the back side of the plate, there are thickened mounting points that match the standard mounting holes of the popular fish finders. The adapter with the side splines is...
Technical Details:
Designed for mounting fish finders and other equipment, the distance between the standard mounting holes of which does not exceed 150 mm. The plate area is 164 x 68 mm, its wall is 3 mm thick. The plate is connected together with a swivel-tilt adapter by M6*30 DIN 912 screw and M6 DIN 985 nut. The design allows the plate to be 360° rotated around the axis ...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on belly boats (float tubes). The system includes an Fs219 mount and a strap holding system. Strap length is 1.5 m, width — 35 mm. The mount, a pair of strap holders and a decorative cover that serves as an end plug are all connected with four M6*20 DIN ...
Technical Details:
Designed for mounting an action camera and lighting (a flashlight) in a 2-to-3 GoPro mounting connector of other holders. The design includes two 2-to-3 connectors, a bracket with a 1/4'' screw thread, and an Hf030 holder for lighting. You can mount the whole structure into any 2-to-3 GoPro connector. Each of two mounting connectors is equipped with an M5*...
Technical details:
Designed to complement accessories with more flexible adjusting options. Consists of an Ab038 ball adapter and an Sb038 socket. The Ab038 has a 1.5" (38 mm) ball and an adapter shaped as a 12 pointed star, the base of the ball is covered with a layer of polyurethane. The socket consists of 2 parts connected to each other with an M8*60 DIN 933 bolt, an M8 D...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on hard, flat, smooth surfaces of vessel (aluminum, fiberglass and laminated wood). Consists of an Fs219 mount and a mounting pad (110 x 110 mm), the base of which is covered with 3M VHB tape. The mount comprises a female adapter. Attached to the pad wit...
Technical details:
Designed to mount accessories with a male adapter shaped as a 12 pointed star on the PVC inflatable boat or belly boat boltrope. The assembly includes a mount with 27.7° side splines, an Mx system, a pair of Dp230 washers with 7.5° splines and an end plug fastened together with an M6*60 DIN 933 bolt and an M6 DIN 985 nut. The tilt position is fixed with a ...
