Technical Details:
It has been designed for installation of the transducer at a distance of 300 mm from the mounting point on the transom. The design consists of the transducer mount with an M6*50 DIN 931 bolt and a square knob nut, that is connected to the tube Ø 22 mm, L — 250 mm, a male adapter shaped as a 12 pointed star and tilt joint. The 27.7° main spline joint is eq...
Technical Details:
Designed for fixing objects with a diameter of from 20 mm to 50 mm. The design consists of a bracket with special external protrusions for fixing the elastic clamp. The bracket is connected to the swivel-tilt adapter using an M6*40 DIN 912 screw and an M6 DIN 985 nut, a tilt joint includes a spring, two Dp230 washers with 7.5° splines, and a male adapter s...
Technical details:
Designed to create structures with accessories equipped with side splines and requiring increased loads. The design consists of an adapter shaped as a 12 pointed star, which has on top 27.7° double-sided splines. The adapter is made as a one-piece molded product and reinforced with a stainless steel plate, it comprises a set of Dp230 adapter washers, an en...
Technical Details:
It has been designed for installation of the transducer at a distance of 300 mm from the mounting point on a kayak or belly boat (float tube). The design consists of the transducer mount with an M6*50 DIN 931 bolt and square knob nut that is joined to the tube Ø 22 mm, L — 250 mm, a male adapter shaped as a 12 pointed star and the tilt joint. The joint wit...
Technical Details:
Designed for mounting two action cameras or one action camera with a lighting (a flashlight). The design comprises two 2-to-3 GoPro mounting connectors and a bracket with a 1/4'' screw thread that is attached to one of them, which are fixed in another 2-to-3 connector on a male adapter shaped as a 12 pointed star. The holder is 360° rotated without the nee...
Technical Details:
Designed for mounting an action camera on the vessel. The design comprises a bracket with a 1/4'' screw thread, a 2-to-3 GoPro mounting connector, the tilt 15° spline joint and a male adapter shaped as a 12 pointed star. The mounted equipment can be rotated in relation to the holder, as well as the whole structure can be 360° rotated in relation to the ada...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The design consists of a cast body with 27.7° side splines, a stopper with a cord for releasing a rope or belt, a spring, a roller, a male adapter shaped as a 12 pointed star, which is connected to the holder body by tilt joint equipped with Dp230 7.5° spline washers. The tilt position i...
Technical Details:
The system is designed for mounting accessories provided with male adapters on tubes of Ø 22 and 25 mm. Consists of two Fs219 mounts and a pad, parts of which are fastened together with four M6*55 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*20 DIN 912 side screws and M6 DIN 934 nuts. Both mounts compr...
Technical Details:
The system is designed for mounting accessories provided with male adapters on tubes of Ø 30 and 32 mm. Consists of two Fs219 mounts and a pad, parts of which are fastened together with four M6*60 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*20 DIN 912 side screws and M6 DIN 934 nuts. Both mounts compr...
Technical Details:
Designed for mounting accessories provided with a male adapter shaped as a 12 pointed star on T-Tracks. Consists of an Fs219 mount and a pad equipped with 2 metal clamps (32 x 16.5 x 6 mm), fastened with two M6*40 DIN 931 bolts and M6 DIN 934 nuts. The assembly includes a set of caps that protect the clamps from rusting, and a set of caps for installation ...
Technical Details:
Is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on inflatable PVC belly boats (float tubes). The kit includes two Fs219 mounts and a strap holding system. Strap length is 1.5 m, width — 35 mm. Each of the mounts is attached to a pair of strap holders and an end plug with four M6*20 DIN 912 screws and M6 DIN 934 ...
Technical Details:
This mount is designed for fixing accessories at the distance of 220 mm from an installation place. The assembly includes a mount, an extender (L — 205 mm) and an adapter with 27.7° side splines. On the one side the extender is fastened together with the mount for accessories and on the other — with the adapter. Both joints have 27.7° splines and are equip...
Technical Details:
Designed for fixing accessories at a distance of 100 mm from the installation place on the vessel. Includes a Ø 50 mm mount with side 27.7° splines, an Ex100 extender and an adapter. The extender is connected with the splines of the mount from one end, and with the splines of the adapter from the other end. Both joints fastened with M6*40 DIN 933 bolts and...
Technical details:
Designed for fixing accessories at a 250 mm distance from installation place. The assembly includes a compact mount inserted into an extender tube. Its 27.7°side splines are connected to the adapter's splines using an M6*50 DIN 933 screw and an M6 DIN 934 nut. The tilt position is fixed with a hex knob. The design comprises both male (for installation on t...
Technical Details:
Designed for fixing spinning rods with different types of reels and handle diameter of up to 38 mm during fishing and transportation. The design comprises the holder body, the retainer, an end limiter, a male adapter shaped as a 12 pointed star and the tilt 27.7° spline joint complete with 7.5° spline adapter washers and a spring. The tilt position is fixe...
Technical Details:
Designed for mounting accessories provided with a male adapter shaped as a 12 pointed star on the T-Track of motorboats and kayaks. The system consists of an Fs219 mount and a mounting pad, which is fixed to the track using two clamps (32 х 16,5 х 6 mm), attached with two M6*40 DIN 931 screws and M6 DIN 934 nuts. The assembly includes a set of caps that pr...
Technical Details:
Designed for fixing accessories with a male adapter shaped as a 12 pointed star to rails and tracks of Ø from 19 to 48 mm, and using an extender — of Ø from 42 to 70 mm. Consists of two Fs219 mounts and a clamp mounting pad. The clamp is designed in the form of 2 jaws, fastened together with an M6*110 DIN 931 bolt which serves as an axis and a Kn222 knob w...
Technical Details:
The kit includes an Ht213 spinning rod holder and an Fs218 accessory mount equipped with a bottom T-bolt. It has been designed for mounting a spinning rod on the T-Track of fishing kayaks. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, a tilt 27.7° splines joint, completed with 7.5° s...
Technical Details:
The kit includes the round plate (Ø 63 mm) and the Mx mounting system. It has been designed for mounting equipment with a flat base and flat objects on the PVC boat boltrope. The 27.7° side splines of the plate are connected with the mounting system splines, the assembly includes two Dp230 7.5° washers, an M6*60 DIN 933 bolt, an M6 DIN 985 nut, a spring an...
Technical details:
Is intended for lowering and hoisting anchors weighing up to 8 kg. The set includes an Al003 holder and an FMb mounting system. The design comprises a cast body with 27.7° side splines, a stopper with a cord for releasing a rope or belt, a spring, a roller, a male adapter shaped as a 12 pointed star, which is connected to the holder body by tilt joint equi...
