Technical Details:Designed for installation of an Fs219 mount on the surface of an inflatable vessel. Thanks to the increased gluing area (140 x 140 mm), the pad can be used with accessories that require increased loads. It has been made of PVC and reinforced with a fiberglass-reinforced polyamide washer with a diameter of 63 mm. The pad is provided with four attachment poin...
Technical Details:
It is designed for installation of an Fs218 T-Track adapter on the surface of an inflatable vessel. The pad has a radius base, which repeats the shape of the cylinder, its gluing area is 110 x 110 mm. The pad is made of PVC and armored with an insert of fiberglass-reinforced polyamide, in the center of which there is a hole for attaching the T-Bolt of Fs21...
Technical Details:
Designed to mount accessories with a male adapter shaped as a 12 pointed star on T-Tracks of motorboats and kayaks. The system consists of two Fs219 mounts and a mounting pad which moves along the track and is fixed in the selected place using 2 universal T-bolts (45 х 25 х 12 mm) and M6 DIN 934 nuts with plastic knobs. Each of the mounts is attached to th...
Size M - Designed to expand the working space on the vessel. The design consists of 2 sections, connected at 3 points with washers, M6*25 DIN 912 screws and M6 DIN 985 nuts. The assembly includes four Fs219 mounts, 2 of which are fastened under the table surface with eight 6.3*25 DIN 9200 self-tapping screws in such a way that adapters can be fixed in them. Two other mounts ...
Technical details:
Designed for fixing a flashlight and other objects with a diameter of 15 to 25 mm. The design consists of an elastic clamp and a holder body, which is covered with an elastic soft insert inside. The body of the holder has projections for fixing of the clamp and is connected to the male a male adapter shaped as a 12 pointed star by 15° spline tilt joint. Th...
Size S - Kit for Mounting of Fish Finder up to 7″ and Transducer on a Belly Boat CyllinderSize M - Kit for Mounting of Fish Finder 7″ — 9″ and Transducer on a Belly Boat CyllinderTechnical Details:
The kit has been designed for installation of a fish finder and a transducer on the belly boat (float tube) cylinder. It comprises the Ss223 plate, the FTr300 transducer arm mount...
Technical Details:
The assembly includes a Ht213 spinning rod holder and an Mx mounting system, designed for installation on the boltrope of PVC inflatables (motorboats and belly boats). The design of the holder comprises a retainer, an end limiter and a hole for a safety carabiner. The holder and a the mounting system are connected by tilt joint with 27.7° splines, complete...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMr132 mounting system for installation on tubes Ø 30/32 mm. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMp225 mounting system for installing on the inflatable PVC cylinder. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, a tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMp224 mounting system for inflatable PVC cylinders. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, a tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an M6 DIN 93...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FFr222 mounting system. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an M6 DIN 934 nut with a hex knob) and ...
Technical Details:
Is designed to hold three spinning rods. Consists of two rod-racks and a pair of FMp224 mounting systems. The design of each rack comprises a Ø 20 mm tube of 430 mm length, and three pairs of brackets with elastic clamps. The tube is connected with an adapter, which is fixed in the mount of the FMp224 system, by a tilt joint with 15° splines. To fix a tilt...
Technical Details:
The kit has been designed for installation of the fish finder and transducer on board of inflatable boats which are equipped with T-Track mounting pads. It comprises the Ft450 assembly for installation of the monitor and the transducer and the Fs218 mount with a bottom T-Bolt. The telescopic transducer arm mount allows the equipment to be mounted at a dept...
Technical Details:
It has been designed for installation of the transducer at a distance of 300 mm from the mounting point on a kayak or belly boat (float tube). The design consists of the transducer mount with an M6*50 DIN 931 bolt and square knob nut that is joined to the tube Ø 22 mm, L — 250 mm, a male adapter shaped as a 12 pointed star and the tilt joint. The joint wit...
Technical Details:
It has been designed for installation of the fish finder on the different vessels. The assembly includes the Sl223 plate and the transducer mount. The plate (106 х 98 mm, the wall thickness is 3 mm) is equipped with a male adapter shaped as a 12 pointed star which rotates 360°. The plate is connected to the tube (Ø 20,4 mm, L — 170 mm) which is attached to...
Technical Details:
The kit has been designed for installation of a fish finder monitor and a transducer on PVC boats. The assembly includes the Ss223 plate for fish finder and telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate (164 х 68 mm) has a male adapter shaped as a 12 pointed star and is connected ...
Technical Details:
The kit has been designed for installation of fish finder monitor and transducer on the PVC boats. The design comprises the Ft450 set for mounting of the fish finder and the transducer, and the Fp224 mounting system. The assembly includes the plate for fish finder and the telescopic holder for mounting the sonar at a depth from 295 to 490 mm. The swivel p...
Technical Details:
The kit has been designed for installation of a fish finder monitor and a transducer on PVC boats. The assembly includes the Ss223 plate for fish finder and telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate (164 х 68 mm) has a male adapter shaped as a 12 pointed star and is connected ...
Technical Details:
The set has been designed for installation of a fish finder monitor or a transducer on the PVC boats. The assembly includes the Sl223 plate for fish finder and a telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate 106 х 98 mm has a male adapter shaped as a 12 pointed star and is connec...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on hard, flat, smooth surfaces of vessel (aluminum, fiberglass and laminated wood). Consists of an Fs219 mount and a mounting pad (110 x 110 mm), the base of which is covered with 3M VHB tape. The mount comprises a female adapter. Attached to the pad wit...
