Technical Details:
It is intended for use as an oarlock in a pair with oars, the diameter of which is Ø 35 mm, as well as for creating additional structures with tubes of the same diameter. The design includes a clamp, consisting of a bracket made as a one-piece cast of fiberglass-reinforced polyamide, fastened together with an M6*40 DIN 933 bolt of A2 (AISI 304) stainless s...
Technical Details:
The mounting pad is designed for installation of T-Track adapters of any models on the hard deck or side of the vessel (fiberglass, aluminum, polyethylene, or wood surfaces). The length of the pad is 255 mm. It is a one-piece product, the design of which provides a T-Track, repeating the shape of tracks at most kayaks and motorboats. It can be fastened to ...
Technical Details:
The mounting pad is designed for installation of T-Track adapters of any models on the hard deck or side of the vessel (fiberglass, aluminum, polyethylene, or wood surfaces). The length of the pad is 150 mm. It is a one-piece product, the design of which provides a T-Track, repeating the shape of tracks at most fishing kayaks and aluminium motorboats. It c...
Technical Details:
Designed for mounting action cameras at a distance of up to 710 mm from the installation place. The design comprises a 1/4'' screw thread and a 2-to-3 GoPro connector, attached to a two-stage telescopic tube (length adjustment from 420 to 710 mm) with a spline joint. The tube is connected to the male adapter shaped as a 12 pointed star using a 27.7° spline...
Technical Details:
Designed for mounting an action camera on the vessel. The design comprises a bracket with a 1/4'' screw thread, a 2-to-3 GoPro mounting connector, the tilt 15° spline joint and a male adapter shaped as a 12 pointed star. The mounted equipment can be rotated in relation to the holder, as well as the whole structure can be 360° rotated in relation to the ada...
Technical Details:
The kit includes an Ht213 spinning rod holder and an Fs218 accessory mount equipped with a bottom T-bolt. It has been designed for mounting a spinning rod on the T-Track of fishing kayaks. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, a tilt 27.7° splines joint, completed with 7.5° s...
Technical Details:
Designed for installation of fish finders with a screen diagonal from 9″ to 12″. Consists of a plate (220 x 52 mm), a mount with female adapter, screwed on its back side using an M6*16 DIN 965 screw and an M6 nut DIN 985, a male adapter with a 27.7° splines tilt joint completed with 7.5° washers (Dp230 model), reinforced with an M6*25 DIN 931 bolt. The til...
Technical Details:
Designed for mounting fish finders with a screen diagonal from 9″ to 12″. The structure consists of a plate (220 x 52 mm), a compact mount with a male adapter shaped as a 12 pointed star, which is screwed on the back side of the platform using an M6*16 DIN 965 screw and an M6 DIN 985 self-locking nut, an Ab038 male adapter with a 1.5″ (38 mm) ball, an Sb03...
Technical details:
Designed for mounting accessories on T-tracks of aluminium motorboats and fishing kayaks. The set consists of two T-shaped clamps, each of which is 45 mm long, two square plastic knobs, two M6*40 DIN 931 bolts, and two M6 DIN 934 nuts, as well as a set of plastic nozzles protecting metal clamps from rusting. Clamps are made of A2 (AISI 304) stainless steel...
Technical Details:
Designed for supplementing action cameras monopods with 2 additional support points. The design includes two telescopic struts that are attached to the monopod using 2 two-element collars. The structure of each consists of 2 telescopic tubes (Ø 20.4 mm, L — 250 mm), a male adapter shaped as a 12 pointed star, a ball joint, the tilt 15° spline joint, an exp...
Technical details:
Designed to create assemblies with YakAttack® accessories with 15° side splines. The set includes 2 molded adapter washers made of fiberglass-reinforced polyamide. Each of them is equipped with 27.7° (13 teeth) splines on one side, and 15° (24 teeth) splines on the other.
Product description:
Designed for installing any YakAttack® accessories equipped with...
Technical Details:
Designed for use as an oarlock in a pair with oars, the diameter of which is Ø 32 mm, as well as for creating additional structures with tubes of the same diameter. The assembly includes a Cn032 clamp, consisting of a one-piece cast bracket made of fiberglass-reinforced polyamide, fastened together with an M6*40 DIN 933 bolt of A2 (AISI 304) stainless stee...
Technical Details:
Designed for attaching cords and carabiners on the vessel. The design consists of a D-shaped shackle and a male adapter shaped as a 12 pointed star, equipped with an O-ring. The assembly also includes an M6*30 DIN 912 screw. The main parts are made of fiberglass-reinforced polyamide. Fasteners — of A2 (AISI 304) stainless steel.
Product description:
The D...
Technical Details:
Designed for fixing objects with a diameter of from 20 mm to 50 mm. The design consists of a bracket with special external protrusions for fixing the elastic clamp. The bracket is connected to the swivel-tilt adapter using an M6*40 DIN 912 screw and an M6 DIN 985 nut, a tilt joint includes a spring, two Dp230 washers with 7.5° splines, and a male adapter s...
Technical details:
Is intended for making assemblies with RAM® accessories. The set includes 2 Rf264-2 adapters. The design of each comprises an adapter shapes as a 12 pointed star, and a connector with 30° internal short splines, connected to a fastening for RAP-B-366U with an M6*70 DIN 912 screw and an M6 DIN 985 self-locking nut. Each of the adapters is equipped with an O...
Technical details:
Designed to create structures with accessories equipped with side splines and requiring increased loads. The design consists of an adapter shaped as a 12 pointed star, which has on top 27.7° double-sided splines. The adapter is made as a one-piece molded product and reinforced with a stainless steel plate, it comprises a set of Dp230 adapter washers, an en...
Technical Details:
The kit includes the round plate (Ø 63 mm) and the Mx mounting system. It has been designed for mounting equipment with a flat base and flat objects on the PVC boat boltrope. The 27.7° side splines of the plate are connected with the mounting system splines, the assembly includes two Dp230 7.5° washers, an M6*60 DIN 933 bolt, an M6 DIN 985 nut, a spring an...
Technical Details:
This onboard ladder is designed for safe diving and getting out of the water. The folding ladder has three sections, four steps and consists of ten pieces of Ø 32 mm tube, jointed with 27.7° splines, the tilt position of which is fixed with an M6 DIN 934 hex knob nut and M6*60 DIN 933 screws. Equipped with two male adapters shaped as a 12 pointed star, whi...
Technical Details:
The set includes two Oh032 holders, which are designed for fixing oars, paddles and tubes with a diameter of from 32 to 35 mm. Each product is made as a one-piece part of fiberglass-reinforced polyamide. The male adapters of each holder are shaped as 12 pointed stars and equipped with O-rings.
Product description:
Each of these holders is suitable for hol...
Technical Details:
Designed for mounting accessories with 27.7° side splines on the boltrope of PVC inflatable vessels. The tilt joint of the pad has double-sided 27.7° splines and includes two Dp230 adapter washers with 7.5° splines, a spring, an end plug, a hex knob and fasteners: M6*60 DIN 933 bolt and M6 DIN 985 nut. The main parts are made of fiberglass-reinforced polya...
