Technical Details:
The kit includes an Ht213 spinning rod holder and an FMa mounting system for mounting of spinning rod on the T-Track of kayaks. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 93...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on belly boats (float tubes). The system includes an Fs219 mount and a strap holding system. Strap length is 1.5 m, width — 35 mm. The mount, a pair of strap holders and a decorative cover that serves as an end plug are all connected with four M6*20 DIN ...
Technical Details:
Is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on inflatable PVC belly boats (float tubes). The kit includes two Fs219 mounts and a strap holding system. Strap length is 1.5 m, width — 35 mm. Each of the mounts is attached to a pair of strap holders and an end plug with four M6*20 DIN 912 screws and M6 DIN 934 ...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The design consists of a cast body with 27.7° side splines, a stopper with a cord for releasing a rope or belt, a spring, a roller, a male adapter shaped as a 12 pointed star, which is connected to the holder body by tilt joint equipped with Dp230 7.5° spline washers. The tilt position i...
Technical Details:
Designed for mounting fish finders and other equipment, the distance between the standard mounting holes of which does not exceed 150 mm. The plate area is 164 x 68 mm, its wall is 3 mm thick. The plate is connected together with a swivel-tilt adapter by M6*30 DIN 912 screw and M6 DIN 985 nut. The design allows the plate to be 360° rotated around the axis ...
Technical Details:
The plate is designed for fixing fish finders and other equipment that have mounting points with distance between them up to 95 mm. The plate area is 106 x 98 mm, the wall is 3 mm thick. On the back side of the plate, there are thickened mounting points that match the standard mounting holes of the popular fish finders. The adapter with the side splines is...
Technical Details:
Is designed for mounting flat objects and equipment with a flat base. It can be used for connection of two Fs219 mounts and creation of the design with a remote mount. The plate diameter is 63 mm. It is connected with the adapter by an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The design allows the plate to be 360° rotated around the axis in ...
Technical Details:
Designed for mounting action cameras at a distance of up to 1046 mm from the installation point. The structure consists of a 1/4'' screw thread and a 2-to-3 mounting connector, fastened to a telescopic two-stage tube (adjustable in length from 460 to 1046 mm) by a spline joint. The tube is fastened to a male adapter shaped as a 12 pointed star using a 27.7...
Technical Details:
It has been designed for transducer mounting at a distance of 309 to 514 mm from the mounting point on the transom. The design consists of the covering transducer fastening (that includes two swivel brackets and radius washers), two telescopic tubes (Ø 20,4 mm, L — 240 mm; and Ø 16,2, L — 220 mm), a male adapter shaped as a 12 pointed star, a spring-loaded...
Technical Details:
Designed to mount accessories provided with a male adapter shaped as a 12 pointed star on T-Tracks of fishing kayaks, as well as (using additional mounting pads) on hard surfaces and on a cylinder of PVC inflatables. The structure consists of a mount body Ø 50 mm, a retainer, a universal T-bolt (45 х 25 х 12 mm) and an M6 DIN 934 nut, completed with a squa...
Technical Details:
Is designed for mounting accessories provided with adapters with male adapters shaped as a 12 pointed star on aluminium boats and fishing kayaks equipped with a T-Track. The design comprises Ø 50 mm accessory mount with side 27.7° splines fastened together with a washer that provides a conversion from spline connection to T-slot, universal T-bolts (45 x 25...
Technical Details:
The system is designed to mount accessories provided with a male adapter shaped as a 12 pointed star on tubes Ø 20 — 32 mm and surfaces from 10 to 32 mm thick without drilling. Consists of two Fs219 mounts and a bench mounting pad. The design of the bench includes a bracket, the inner upper part of which is covered with PVC, a clamp with an M3.2 DIN 6799 l...
Technical Details:
Designed to fix holders, arm mounts, rigging, tubular structures and other accessories provided with a male adapter shaped as a 12 pointed star. The diameter of the mount is 61 mm, it includes a female adapter. The mount can be fastened directly on the hard deck or side of the vessel (fiberglass, polyethylene, wood, aluminum surfaces) or installed using s...
Technical Details:
It has been designed for mounting of the Garmin Panoptix LiveScope transducer. The assembly also includes the compact mount, which allows the plate for fish finders to be installed. The design consists of two eccentric tubes Ø 20,4 mm: L — 530 mm and L — 170 mm, which are connected by the two-component clamp. The assembly also includes a tube (L — 120 мм),...
Technical Details:
Designed for fixing spinning rods with different types of reels and handle diameter of up to 38 mm during fishing and transportation. The design comprises the holder body, the retainer, an end limiter, a male adapter shaped as a 12 pointed star and the tilt 27.7° spline joint complete with 7.5° spline adapter washers and a spring. The tilt position is fixe...
Technical details:
Designed to mount accessories at a distance of 220 mm from the installation place. The assembly includes a compact accessory mount inserted into the extender tube, the tube (L — 180 mm, Ø 32 mm), and a one-piece male to male adapter, reinforced with an M6*25 DIN 931 bolt. The design comprises both male (for installation on the vessel) and female (for fixin...
Technical details:
The set includes 6 washers designed for more precise adjustment of BORIKA FASTen® accessories, which have tilt spline joints. The washers provide a transition from 27.7° splines to 7.5° splines, thereby reducing the increments. Each washer is made as a one-piece molded product of fiberglass-reinforced polyamide.
Product description:
Adapter washers of this...
The holder secures the front leg of the electric motor and keeps it stable during transport. The holder mounts to any "Fasten" lock, and the "Fasten" lock can be mounted on any surface (C-channel, solid surface, PVC pipe) using mounting brackets. The maximum length of the arm without a mounting point is 310 mm. Suitable for motors with a shaft diameter of up to 25 mm
Technical details:
Designed to extend the distance between the accessory with 15° spline tilt joint and the mount in which it is fixed by 154 mm. The design consists of a tube (Ø 22 mm, L — 120 mm) and 2 connectors located along its edges. The assembly also comprises an M6*30 DIN 931 bolt, a square knob with an inserted M6 DIN 934 nut, and 2 washers with 15° splines. The pla...
Technical details:
Designed to extend the distance between the accessory and the mount in which it is fixed by 160 mm. The design consists of a Ø 25 mm, L — 90 mm tube, 2 connectors with side 27.7° splines located along its edges, a spring, an M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. The plastic details are made of fiberglass-reinforced polyamide. T...
