Technical Details:
The system is designed for mounting accessories provided with male adapters on Ø 22 and 25 mm tubes and rails. Consists of a Fs219 mount and a pad, the two parts of which are fastened together with four M6*30 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*20 DIN 912 side screws and M6 DIN 934 nuts. The m...
Technical Details:
Designed for mounting accessories provided with a male adapter shaped as a 12 pointed star on T-Tracks. Consists of an Fs219 mount and a pad equipped with 2 metal clamps (32 x 16.5 x 6 mm), fastened with two M6*40 DIN 931 bolts and M6 DIN 934 nuts. The assembly includes a set of caps that protect the clamps from rusting, and a set of caps for installation ...
Technical Details:
Designed for mounting accessories provided with a male adapter shaped as a 12 pointed star on the T-Track of motorboats and kayaks. The system consists of an Fs219 mount and a mounting pad, which is fixed to the track using two clamps (32 х 16,5 х 6 mm), attached with two M6*40 DIN 931 screws and M6 DIN 934 nuts. The assembly includes a set of caps that pr...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on the hard deck or side of boats and fishing kayaks. Can be attached to aluminum, fiberglass, polyethylene or wood surfaces. Consists of a Fs219 mount and a round mounting pad. The mount comprises a female adapter. The mount and the mounting pad are con...
Technical details:
Designed to mount accessories with a male adapter shaped as a 12 pointed star on the PVC inflatable boat or belly boat boltrope. The assembly includes a mount with 27.7° side splines, an Mx system, a pair of Dp230 washers with 7.5° splines and an end plug fastened together with an M6*60 DIN 933 bolt and an M6 DIN 985 nut. The tilt position is fixed with a ...
Technical details:
It is intended for organizing the things on the vessel. The design consists of a board (282 x 380 mm), an Fs219 mount attached under the surface with four 6.3*16 DIN 9200 self-tapping screws, a swivel-tilt male to male adapter with a 27.7° spline joint including a knob with an inserted M6 DIN 934 nut, a spring and an M6*55 DIN 933 bolt. Eight neodymium mag...
Technical Details:
It has been designed for installation of the Garmin Panoptix LiveScope transducer and transducers with side mounting. The design consists of an eccentric tube Ø 20,4 mm (L — 400 mm), connected to a similar tube (L — 170 mm) by a two-element clamp and to a tube (L — 120 mm) with 7.5° spline tilt joint. The design is fixed into the mount by a male adapter sh...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star in rectangular mounting niches of kayaks and motorboats. Consists of a Fs219 mount and a mounting pad (110 x 53 mm). The mount comprises a female adapter. Is attached to the pad with 4 screws M6*20 DIN 912 and nuts M6 DIN 934. To install accessories, swi...
Technical Details:
Designed for fixing oars, paddles and tubes with a diameter from 32 to 35 mm. Made as a one-piece molded product of fiberglass-reinforced polyamide. a male adapter shaped as a 12 pointed star is equipped with an O-ring.
Product description:
The holder of this model is suitable for holding the oar or a paddle during storage and transportation, as well as ...
Technical Details:
Designed to implement various design solutions when equipping a vessel: a Ø 6 mm cross-section hole in the upper part of the adapter allows a rope or a boat halyard to be securely attached. Made as a one-piece molded product of fiberglass-reinforced polyamide. The male adapters of each hook are shaped as 12 pointed stars and equipped with O-rings. Can be 3...
Technical Details:
Designed for securing a halyard, rubber tie or net. Made as a one-piece molded product of fiberglass-reinforced polyamide. The male adapter shaped as a 12 pointed star is equipped with an O-ring. The hook can be 360° rotated around the axis in 30° increments.
Product description:
The rigging hook is an easy-to-install, reliable and versatile securing devi...
Technical details:
Designed to connect together two accessory mounts. The design consists of two parts, equipped with adapters shaped as 12 pointed stars, which are connected together by a swivel connector. Such a design provides the 360° rotation around the adapter axis in 7.5° increments. The assembly includes an M6*70 DIN 912 screw and an M6 DIN 985 nut. Both sides of the...
Technical Details:
Is designed for mounting flat objects and equipment with a flat base. It can be used for connection of two Fs219 mounts and creation of the design with a remote mount. The plate diameter is 63 mm. It is connected with the adapter by an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The design allows the plate to be 360° rotated around the axis in ...
Technical Details:
The plate is designed for fixing fish finders and other equipment that have mounting points with the distance between them up to 150 mm. The assembly consists of a 164 х 68 mm plate with a wall 3 mm thick, connected together with a tilt adapter using an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The assembly also includes an adapter washer tha...
Technical Details:
The plate is designed for installing fish finders and other equipment with the distance between mounting points up to 95 mm. The assembly consists of a 106 x 98 mm and 3 mm thick plate, connected with a swivel adapter using an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The assembly also includes an adapter washer that allows for fully rotating...
Technical details:
The system is designed for mounting accessories provided with male adapters on tubes of Ø 30 and 32 mm. Consists of an Fs219 mount and a pad, the two parts of which are fastened together with four M6*30 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*16 DIN 912 side screws and M6 DIN 934 nuts. The mount ...
Technical Details:
Designed for installing accessories on the belly boat (float tube). Consists of a Ø 32 mm tube, two adapters, Dp230 washers with 7.5° splines, an M6*45 DIN 912 screw and an M6 DIN 985 self-locking nut. The assembly includes three FMr132 systems and the Fs223 mount, attached to the pad at the end of the tube with the T-bolt. The elements of the FMr132 syst...
Technical Details:
Designed for fixing from 1 to 7 accessories provided with a male adapter shaped as a 12 pointed star. The design comprises a tube (Ø 32 mm, L — 700 mm), three FMr132 mounting systems, two RLp032 collars with male adapters (assembly of each includes an M6*40 DIN 933 screw, an M6 DIN 934 nut, an M6*35 DIN 931 bolt and a hex knob). Parts of each FMr132 mounti...
Size M - Designed for fixing from 1 to 6 accessories provided with a male adapter shaped as a 12 pointed star. The design comprises a tube (Ø 32 mm, L — 500 mm), three FMr132 mounting systems, two RLp032 collars with male adapters (each collar includes an M6*40 DIN 933 screw, an M6 DIN 934 nut, an M6*35 DIN 931 bolt and a hex knob). Parts of each FMr132 system are fastened t...
Size S - Is designed for mounting from 1 to 5 accessories provided with male adapters shaped as a 12 pointed star. The design comprises a tube (Ø 32 mm, L — 350 mm), two FMr132 mounting systems and an Fs219 mount attached to a mounting pad (the elements of which are fastened together around the tube with four M6*60 DIN 912 screws and M6 DIN 934 nuts) which is attached to a m...
